Any conductor could be used for the carbon block. 任何导体都可以用作碳转。
Finite Element Analysis and Optimum Design of Plane Miller for Carbon Block 炭块平面铣床有限元分析及优化设计
The cathode pastes with high performance for aluminium were developed successfully from carbon block processing dust according to large-scale cell specification. 根据大型预焙电解槽对阴极糊的工艺技术要求,利用炭块加工除尘粉,成功地开发出了高质量的铝用阴极糊。
The department introduced a online repair technology can repair damaged side carbon block, which has the important significance to extending the pot life and reduce the overhaul cost. 本文介绍了一种侧部炭块在线修理技术,可在线修补侧部炭块破损,对于延长槽寿命以及降低大修费用有着重要的意义。
The question existing in changing screen frequently during the production of cathode carbon block and paste for aluminum cathode was found, which would influence the enterprise capacity. 对在生产铝用阴极炭块和糊料的破碎筛分生产工序产生的频繁更换筛网而影响企业产能发挥的问题进行了工艺技术探讨及解决。
Design and Implementation of a Neural Network Controller for the Automatic Cathode Carbon Block Assembly 阴极炭块自动组装神经网络控制器的设计与实现
The carbon block consists of two electrodes spaced so that any voltage above the design level is arced from line to ground. 碳块中有两个彼此间隔的电极,任意高于设计标准的电压都可以跨过电线入地。
Research on neural networks self-adapting controlling of worktable in the cathode carbon block automatic assembly 阴极炭块自动组装工作台自适应神经网络控制研究
AC impedance analysis is employed to study frequency-response characteristics of supercapacitors utilizing carbon nanotube and activated carbon block electrodes. 采用碳纳米管作为超大容量离子电容器的电极材料,应用交流阻抗频谱法,研究了超大容量离子电容器的频率响应特性。
Thermal diffusivity of self-baking carbon block with different graphitization degrees 石墨化率不同的自焙炭块的热扩散率
Application of cold machining technology for machining cathode carbon block for aluminium 铝用阴极炭块冷加工工艺技术与应用
Present situation and future development of carbon block 炭砖现状及今后的发展
Cause affecting sawing of carbon block belt saw and treatment measures 影响带锯机锯切质量的原因及处理措施
Design and Calculation of Dimension of Ring Type Carbon Block for BF 高炉环形炭块尺寸的设计及计算
Permeation process of molten iron in self-baking carbon block 铁液在自焙碳块中的渗透过程
R: The methods for reclamation of the waste cathode carbon block obtained in aluminum reduction process are introduced in detail. 详细介绍了铝电解槽废旧阴极炭块的组成及国内外回收处理废旧阴极炭块的各种方法。
Improving conductivity of carbon block cathodes 提高铝用阴极炭块导电率的研究
Because of the balance of forces in cathode carbon block assembling process, the interaction between particles affects the microscopic and macroscopic behavior of the ramming paste, which leads to agglomeration and breakage. 在阴极炭块组装过程中,粘性糊料颗粒间的相互作用导致颗粒的成团和破碎,由此影响糊料的微观和宏观行为。
The key technology of automatic inspection and recognition is deeply researched taking cathode carbon block as the research object in the thesis. 论文以阴极炭块这一典型的炭素制品为研究对象,对其内部缺陷的自动检测与识别的关键技术进行了深入系统的研究,设计开发了X射线自动检测系统。
Porous Features of A Self baking Carbon Block 一种自焙炭块的孔隙特征
Apparent Porosity and Bulk Density of a Self Baking Carbon Block 一种自焙炭块的显气孔率和体积密度
Discussion on technology for producing cathode carbon block with large size by vibration molding 振动成型生产大规格铝用阴极炭块的工艺技术探讨
Selection of Carbon Block Storage Process 炭块堆存工艺方案的选择
Given is the development status in recent 40 year in Ningxia as to coal cleaning and process, coal coking, manufacture of electrode paste, carbon block, calcined coal, activated carbon, silicon carbide, carbon black from gas, and coal gasification and liquefaction. 阐述了近40年来宁夏在煤炭洗选加工,煤炭炼焦,煤制电极糊、炭块、煅料、活性炭、碳化硅、瓦斯炭黑及煤炭气化和液化等方面的发展情况;
In chapter 3, the construction method of the compactly supported biorthogonal wavelet is studied, and the biorthogonal wavelet is constructed successfully that suit for x-ray image of cathode carbon block. 第三章运用小波理论研究了紧支集双正交小波基的构造方法,成功地构造出适合阴极炭块X射线图像处理的双正交样条小波基。
With such ultra-clean coal as feedstock for production of activated carbon, carbon-addition agent and high-graphite content carbon block as cathode, relatively high economic benefit attained. 以超低灰煤为原料生产活性炭、增碳剂、高石墨阴极炭块等产品可获得较高的经济效益。
The results show that the electrical resistivity of TiB_2 cathode coating without TA containing is~ 30.3 μΩ· m, which is lower than that required by the national standard for the semi-graphitic cathodic carbon block. 研究结果表明在960℃时,不添加TA的TiB2复合涂层的电阻率为30.3μΩ·m,比国家标准对铝电解用半石墨阴极碳块的电阻率的要求值低,可以用于实际生产;
The above goals can be attained by using graphitized or semi graphitized cathodic pot lining, or by adding TiB 2 coatings onto normal carbon block. 采用半石墨化或石墨(化)阴极内衬,或在普通碳块上增加TiB2涂层,可以实现上述目的。
Cathode carbon block group consists of three parts, including the cathode carbon block, the cathode paste and the cathode steel bar. 阴极炭块组由阴极炭块、阴极钢棒和阴极糊料三部分组成。